Our TLV Products
Our TLV Products
TLV Free-floating steam traps
It reduces energy losses by facilitating the drainage of condensate that forms in steam systems.
.jpg)
TLV Thermodynamics steam traps
Thermodynamic steam traps are automatic traps that open and close at regular intervals under thermodynamic conditions, releasing condensate and air from steam circuits while preventing steam from escaping.
.jpg)
TLV Thermostatic steam traps
Thermostatic steam traps operate based on the temperature difference between steam and condensate.
.jpg)
Steam meter
In many branches of industry, processes requiring high temperatures (e.g., 300°C) can utilize steam or hot water boilers as heat carriers to reach these temperatures. However, for high temperatures like 300°C...
TLV Steam Separator
While there are various types of separators, their purpose is to separate water droplets from the produced steam and protect installations and fittings by reducing energy loss from the steam.
TLV Pilot Operated Pressure Reducer
Pressure reducers are used to lower the pressure of steam to a desired level.
TLV Control Valves
Control valves come in a wide variety and are air-operated or electrically powered valves that can open and close several steam paths in a controlled manner.
Flash steam units
Heat recovery from steam (flash steam) escaping into the atmosphere from the condensate tank in steam generation plants with an open-to-atmosphere condensate system;
Produced from a steam boiler at a specific operating pressure...
Safety valve
Safety valves operate as a safety measure when set to a specific pressure. When the pressure exceeds the set level, they mechanically open, releasing pressure. They are a crucial safety feature.
TLV Mechanical condensate pumps
In steam systems, condensate recovery is necessary considering its energy content. Increasing the boiler feedwater temperature by 6°C can result in approximately 1% energy savings.
TLV Compact Pressure Regulator DR20
Compact, lightweight, direct-acting pressure relief valves. Stainless steel construction.
Heat exchanger assembly
In steam systems, condensate recovery is necessary considering its energy content. Increasing the boiler feedwater temperature by 6°C can result in approximately 1% energy savings.
